Bio safety Cabinet

Product Details:

• Supply Voltage(V): 220V 50Hz
• Cleanliness: 100 grade@≥0.5μm (FBI209E )
• Number of colony: ≤0.5/utensil.time(Φ90mm cultivation utensil)
• Average wind speed: 0.3-0.6M/S(Adjustable)
• Noise: ≤62αB(A)

Product Details:

Specifications:

Supply Voltage(V): 220V 50Hz

Cleanliness: 100 grade@≥0.5μm (FBI209E )

Number of colony: ≤0.5/utensil.time(Φ90mm cultivation utensil)

Average wind speed: 0.3-0.6M/S(Adjustable)

Noise: ≤62αB(A)

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI
• Production Capacity: 5
• Delivery Time: 4 WEEK

Product Details:

Specifications:

• The main body should be mad in mild steel (Heavy gauge- 19 G)
• Table top and working zone should be made of stainless steel (304 grade)- Heavy gauge- 20 G
• Table top should be in two parts: Front perforated portion 5” in size, Non-perforated working zone, Work Area should be approximately 2 X 2, 3 X 2, 4 X 2 with shutter opening of 489 mm
• Air Flow should be vertical down low with 70 % Circulation 30 % exhaust
• Cleanliness level should be less than 3.5 particles/ liter of 0.5 mm and larger
• Noise Level should be less than 65 dB
• Vibration level: Less than 2.3 mm
• Average air ow should be 90±20 fpm
• Door fully automatic
• HEPA filters should be Mini Plate with 99.99% efficiency for 0.3 microns with integral metal guards & filter frame gaskets and manufactured in class 1000 super clean air conditioned Air pressurization system should be statically and dynamically balanced, environment for longer life.
• Fitted with special vibration reducing the system to suit low noise and vibrations. UV lamp should be in working zone (40 microwatts/ square cm at 254 mm or better) and placed so that the operator cannot see directly i.e. eyes should be always protected. Should have Rehabitable pre-filters should have the efficiency of more than 80%. Should have Switches & Electrical sockets outlets for 15/5 amp. Should have Pressure Monitors like Magnehelic gauge are required to indicate pressure drop air. Exhaust blower should be capable for 100% exhaust interconnected with supply air blower; the system should only start when the negative pressure is developed Back holes should be there on vertical walls to provide more work area on Should have Switches & Electrical sockets outlets for 16 amp. Suitable power supply 230 volts a/c

Additional Information:

• Item Code: Class-2-A2

Product Details:

• Particle Retention: 0.12 / 0.3 micron above
• Cleanliness level of Classification: Overall better than Class 100 Of US FS 209 E or Class 5 of ISO 14644-1
• Material: Electro-Galvanized iron, IS 304 / 316 Grade SS